Reservoir Hose - 6mm (per 30cm)
Low pressure EPDM hose designed for connecting hydraulic fluid reservoir to master cylinder. Now supplied unbraided in black with reinforced inner. This hose is 6mm internal diameter, suitable for all clutch circuits and 6mm brake reservoir fittings. Outside diameter 13mm. Use with FS014 hose clips. Always route hose carefully to avoid kinks and maximise the bend radius where possible. Work backwards from cylinders to reservoirs, then cut to fit once hoses are clipped in place with sufficient play. Don't cut new hose to length from your existing hoses as some original hoses are unnecessarily short. Quantity price is per 30cm (per foot), but supplied as a continuous length i.e. if you order quantity 4 you will receive one 120cm length (4 x 30cm). Required quantities are as follows: Lancia Scorpion and Montecarlo S1 cars (both left and right hand drive) with clutch reservoir on the driver side - Clutch circuit, 3 x 30cm lengths; Brake circuit (total) for early cars, 10 x 30cm lengths; Lancia Montecarlo S2 cars (both left and right hand drive) with clutch reservoir on the passenger side - Clutch circuit, 5 x 30cm lengths; Important: The hose size must match your master cylinder fittings and reservoir outlets. Always confirm your existing setup prior to ordering as differing parts may have been previously used. For 8mm brake circuits, see reservoir hose BR032.
Code: BR031
Price: £ 3.45
Stock: Purchase at Eurosport (UK)
