Cooling Hose Set
Black silicon rubber cooling hose set for later Montecarlo models using the original factory 4 port thermostat, but can also be retro-fitted to Scorpion and early Montecarlo models where a 3 port thermostat was used. Note: To complete this hose set you will also require a heater return hose to suit your thermostat and inlet pipe at the water pump - this must be ordered separately as either: CO317 for 3 port thermostat and 3 port inlet pipe; CO318 for 4 port thermostat and 2 port inlet pipe; CO319 for 4 to 3 port thermostat conversion with existing 2 port inlet pipe; Heater hoses are moulded to the original form for perfect routing - these are not generic straight hoses that are easily kinked. The set comprises: Radiator left; Radiator right; Cylinder head top rail to right radiator tube; Lower tube rail to left radiator tube; Cylinder head rail to thermostat*; Lower tube rail to thermostat*; Thermostat to water pump; Expansion tank lower to water pump; Expansion tank upper to cylinder head top rail; Cylinder head left to heater feed pipe; Heater return pipe to auto-choke take-off; Take-off Tee piece to auto-choke; Auto-choke to inlet manifold; *where a 3 port thermostat was originally used these two hoses are swapped over and the thermostat re-orientated. You may also require the heater return to auto-choke take-off Tee piece CO312 or joiner CO321. Matching stainless steel hose clip set FS304 is available separately. Manufactured to a premium quality from high grade silicone polymer and reinforced with a high strength polyester fabric. Designed to work to greater pressure levels and an increased minimum/maximum operating temperature range of -40ºC to +180ºC.
Code: CO305B
Price: £ 215.00
Stock: Purchase at Eurosport (UK)